
The ion-exchange cycle
Aqua Pro's softener guide describes water passing through resin beads that grab calcium and magnesium and swap in sodium. When the resin fills, the system flushes it with a salt-water rinse and starts over. That cleaning cycle is regeneration.
- Resin removes the hardness minerals.
- Salt is used to regenerate the resin.
- The treated-water hardness test should read lower after a working softener.
Size from daily grains
Use hardness multiplied by daily gallons. Aqua Pro's example is a family of four using about 300 gallons a day on 14-grain water: 14 × 300 = 4,200 grains a day. On that load, its example 40,000-grain softener regenerates roughly every nine days.
- Too small: frequent regeneration and wasted salt.
- Too large for the load: hardness can slip through when the system is not matched to use.
- Start with the tap reading, not a city average alone.
Sodium and upkeep
Aqua Pro's guide estimates roughly 7–8 milligrams of sodium per liter for each grain of hardness removed. At 14 grains, an 8-ounce glass of softened water carries about 24 milligrams of sodium. Its maintenance baseline is to check salt monthly and have the system looked over once a year.
Sources
- Aqua Pro Services, “Water Softeners,” staged site copy on file.
- Aqua Pro Services, “Water Treatment Information & FAQs,” comparison table, staged site copy on file.