
Key point: The Environmental Protection Agency secondary guideline range for pH is 6.5 to 8.5.
The federal scale
Aqua Pro's pH research uses the Environmental Protection Agency's secondary drinking-water table: pH 6.5–8.5. The staged guide places the local story at the high end of that range rather than assuming every pH concern means acid water.
- Pinellas County range in the source file: 7.90–8.11.
- Another cited county average: 7.88.
- Another cited report figure: 7.8.
High pH is not the same as hard water
The same Pinellas report that places pH around 7.90–8.11 also places hardness around 11.1–14.3 grains per gallon. One number cannot substitute for the other.
- pH describes acidity or alkalinity.
- Hardness describes calcium and magnesium.
- Both belong on the test record, as separate readings.
When low pH is the issue
Read a result below the guideline range alongside the rest of the test and the home's plumbing. Do not choose treatment from pH alone, and do not ignore it because the water looks clear.
Sources
- United States Environmental Protection Agency, “Secondary Drinking Water Standards: Guidance for Nuisance Chemicals,” as captured in Aqua Pro staged pH research, 2026-11-16.
- Aqua Pro county sources for the cited local pH figures.