Where the water comes from
Safety Harbor buys Pinellas County Utilities water and distributes it through its own system. The county's twice-yearly chlorine-maintenance program is documented as covering Safety Harbor along with the county's own customers.
What the report measured
| Measure (what it is) | Result | Legal limit | How to read it |
|---|---|---|---|
| Hardness | County average 217 parts per million, range 189–244 — a softener setting of 11.1–14.3 grains per gallon, printed in the county's own report | No legal limit | "Very hard" |
| Disinfectant: chloramine, highest running annual average | 3.8 parts per million | 4.0 parts per million | 95% of the legal cap |
| Disinfection byproducts, highest site averages | Trihalomethanes 41.6 parts per billion; haloacetic acids 28.1 parts per billion | 80 and 60 parts per billion | About half their limits |
| Lead / copper, 90th percentile of home samples (county system) | 0.8 parts per billion / 0.3 parts per million | 15 parts per billion / 1.3 parts per million action levels | Well under |
| PFAS at the county's entry point (federal monitoring running from July 2023) | Not detected | 4.0 parts per trillion each for the two main compounds | None found |
Source: County program coverage and the city's purchaser-system status for the supply relationship; Pinellas County Utilities 2025 Consumer Confidence Report for every number below. Safety Harbor's own report republishes county data and was not separately opened in this pass.
What it means for your home
- The supply-side numbers are the county's — see the Pinellas County Utilities page for the full picture.
- Safety Harbor's older downtown housing stock means the in-home side matters at least as much as the supply side: old galvanized pipe and older water heaters with sediment are home problems no utility report will show you.
Thinking about treatment? Find a verified provider — and ask any provider to test your water at your tap, because your home's own plumbing is part of the picture.