Water Treatment Market

Know Your Water. Hire Verified. Buy Right.

Iron & Manganese

Iron usually announces itself in orange. Manganese is the darker companion—and its guideline is much lower.

Outdoor well-water treatment equipment beside an older pressure tank
Photo from the Aqua Pro Services website asset library. It illustrates the equipment type; it is not evidence for a measurement or claim on this page.
← Water Problems
Key point: The Environmental Protection Agency secondary guideline is 0.3 milligrams per liter for iron and 0.05 milligrams per liter for manganese.

Read the stain and the number

The Environmental Protection Agency's secondary drinking-water guidance lists iron at 0.3 milligrams per liter and manganese at 0.05 milligrams per liter. Aqua Pro's iron guide uses those figures as the scale for deciding when staining becomes likely.

A treated-city comparison

Pinellas County's published finished-water iron average in the Aqua Pro source file is 0.058 parts per million, with a range of 0.018 to 0.097 parts per million. That is a treated utility number, not a prediction for a private well.

Why the source matters

Aqua Pro's well-water guide treats iron as a test-and-size problem: the amount and the rest of the water chemistry decide the equipment. A stain tells you where to look; the test tells you what to build.

Sources

Keep going