Water Treatment Market

Know Your Water. Hire Verified. Buy Right.

The Softener Bypass

Bypass takes the softener out of the water path while the house keeps water. It is the first move when the unit is leaking or running.

Close view of a water softener control valve mounted on a treatment tank
Photo from the Aqua Pro Services website asset library. It illustrates the equipment type; it is not evidence for a measurement or claim on this page.
← Maintenance & Care
Key point: Service means water goes through the softener. Bypass means water skips it.

Do this first

Aqua Pro's emergency guide gives the order: put the softener in bypass first. If water is still coming, use the main shutoff second. Do not force a stiff bypass with a wrench; a cracked bypass turns a small problem into a bigger one.

Find the bypass

The bypass sits on the back of the control head where the two water pipes connect. Aqua Pro's guide names two red arrow handles on Clack, a marked lever or handles on Fleck, two round knobs on Autotrol, and a handwheel or push-pull control on Hankscraft styles.

The common mix-up

A softener can sit in bypass for months while the owner wonders why the water feels hard again. If you just moved in—or hard water suddenly returns—check the bypass before assuming the softener failed.

Sources

Keep going