Water Treatment Market

Know Your Water. Hire Verified. Buy Right.

Maintenance & Care

Small checks prevent most surprises. Each care task has its own page instead of being buried in one long manual.

Close view of a water softener control valve mounted on a treatment tank
Photo from the Aqua Pro Services website asset library. It illustrates the equipment type; it is not evidence for a measurement or claim on this page.
← Information library
Use the equipment maker's manual for model-specific controls. These pages explain the purpose, timing, warning signs, and records that apply across the featured guides.

Guides in this section

Softener Salt and Regeneration

Regeneration is the softener cleaning its resin so it can remove hardness again. Salt is part of that cleaning cycle—not a water additive to shop for by health claims.

How to Use a Softener Bypass

Bypass takes the softener out of the water path while the house keeps water. It is the first move when the unit is leaking or running.

Annual Water Heater Sediment Flush

A water softener is not the only equipment affected by hard water. Sediment settles in the water heater whether anyone records it or not.

When Hard Water Comes Back

Two simple states explain many “my softener stopped working” calls: the unit is in bypass, or it cannot regenerate properly.

Resin & Media Care

Softener resin does the softening. What wears it out—chloramine, iron, time—the signs it is tired, and why tired resin is a media job, not a new system.

Carbon Media Care

Carbon traps chlorine taste and chloramine until it fills up. Catalytic versus plain carbon, the signs of exhaustion, and what a media change involves.

Well Chlorination

Shock chlorination, step by step from Florida’s own well guidance: the bleach rules that matter, the waiting period, and the retest.

Water Heater Anode Rods

The anode rod rusts so your tank does not. Why the manuals want it checked yearly, the hot-water smell clue, and when replacement is due.

Clack WS1 Owner Guide

The V3006 bypass arrows, setting the clock, starting a regeneration by hand, the hardness setting, and salt—from the factory books.

Fleck 5600 Owner Guide

Three bypass styles, setting the clock on both heads, manual regeneration, the program wheel, and the right salt to use.

Autotrol 255 Owner Guide

The Series 256 bypass handles, Logix 742 and 762 controls, starting a regeneration, and salt—from Pentair’s own manuals.

Hankscraft REV4 Owner Guide

The two bypass styles, the display lock, modes A-01 to A-07, and salt—owner steps only, from the RevV4 service manual.

Hankscraft REV 2.5 Owner Guide

The same ceramic bypass as the REV4, the clock, settings from your card, and salt—from the RevV2.5 factory service manual.

UV Lamp Replacement

The annual lamp change and quartz sleeve cleaning for a VIQUA ultraviolet system—9,000 hours, the exact part numbers, and the safety steps, from the manufacturer’s own manual.