
1. The bypass — three styles
- Metal bypass (the classic): one flat lever with an arrow, and the words SERVICE and BYPASS stamped into the body. Turn the handle until the arrow points at the word you want.
- Plastic handle-style: two small handles. Both along the pipes is service; both across the pipes is bypass.
- Plastic knob-style: two knobs. Turn both clockwise until the holes in the knobs face up for bypass.
- Leaking or running nonstop? Bypass first — the softener is isolated, the house still has water — then sort out the rest.
2. The clock, and 3. a regeneration by hand
- Timer-knob 5600: press the red time-set button and turn the 24-hour gear until the current time lines up with the time-of-day arrow.
- 5600SXT: press and hold either the Up or Down button until the display reads TD (time of day), set the time, then press the Extra Cycle button to return to normal operation.
- Timer-knob regeneration: turn the manual regeneration knob slowly clockwise until the program switch lifts; let the motor stop at each step before nudging further.
- 5600SXT regeneration: press and hold the Extra Cycle button for five seconds to start one now; press it once, briefly, to step a running cycle forward.
4. Settings, and 5. salt
On the timer-knob head, the program wheel matches people in the house against grains of hardness — lift the people dial and line your household size up with your water's hardness (Clearwater runs about 14 grains). On the SXT, capacity and hardness live in Master Programming, which is installer territory; your numbers are on the settings card at your unit. Pentair's own owner's manual is plain about salt: only sodium chloride salt made for water softeners — rock salt and snow-melt carry dirt and chemicals that hurt the water and the unit, and the service manual adds no granulated or rock salt. Pellets are the form that fits. Check monthly, keep salt above the water line, and test a full-looking tank for a salt bridge with a broom handle.
Sources
- Pentair Residential Filtration, Fleck 5600 Service Manual (Form 40106, Rev K), Fleck 5600SXT Downflow Service Manual (Form 42684, Rev K), and Fleck SXT Owner's Manual (Form 44001, Rev A) — verified copies and verification log on file (manual-sources record, 2026-11-02): bypass styles and positions, clock steps, Extra Cycle behavior, salt rule.
- Aqua Pro Services Fleck 5600 quick guide, staged copy on file.