
It comes from pipes, not the plant
Lead and copper dissolve into water as it sits in service lines, solder, and fixtures. That is why the federal Lead and Copper Rule samples at household taps and judges a system on its 90th percentile — the level below which 90 percent of sampled homes fall — instead of testing at the treatment plant.
- Lead action level: 15 parts per billion (0.015 milligrams per liter) at the 90th percentile.
- Copper action level: 1.3 parts per million (1,300 parts per billion).
- Going over an action level is not itself a violation; it triggers corrosion control, monitoring, public education, and service-line replacement duties.
The rule is tightening
The Environmental Protection Agency finalized the Lead and Copper Rule Improvements in October 2024. The compliance date is November 1, 2027; the update lowers the lead action level to 10 parts per billion and requires most systems to replace lead service lines within 10 years. The health goal does not move: it stays at zero, because there is no known safe level of lead exposure, and children under six are the most at risk.
What this means at your tap
A passing system average cannot see your house. Two homes on the same street can test differently because their pipes differ. The reading that matters for your family is a first-draw sample from your own tap, run by a certified laboratory — the same logic Florida applies to private wells, where the health department recommends lead testing on a three-year cycle.
Sources
- U.S. Environmental Protection Agency, Lead and Copper Rule and 2024 Lead and Copper Rule Improvements (action levels, 90th percentile, health goal of zero, compliance dates), including the EPA quick reference guide for regulated systems.
- Florida Well Owner Network, University of Florida IFAS Extension (Florida Department of Health lead-testing recommendation for private wells).
- Water Treatment Market city water pages, on file (90th-percentile readings in local utility reports).